How to Get a Toyota Replacement Key
If your Toyota key fob isn't functioning correctly, you might need a replacement battery. It's easy to open the case and insert a flat tool, like a screwdriver. Remove the battery carefully and replace it with a fresh one.
This isn't a complete solution, but it could help get you back on the road. If you have any questions about our Key Replacement Protection that is included in our Tire and Wheel Protection plan We invite you to contact us.
How do I get an alternative key
We all have keys that go missing at some moment or another. Sometimes, it's as easy as going back to your steps and examining the where you normally set them. There could be a more serious issue, such as a broken key fob or, worse than that, a lost one. If your key fob isn't working, it will probably need a new battery, or it could need to be reprogrammed. There are a few things you can do to obtain a Toyota key replacement for your car, truck or SUV.
First, determine if it has been lost. If it's lost, you'll need to bring a blank key to your local Toyota dealer and have it cut. You'll need proof of ownership, like your registration or insurance card. If you don't have these documents, the dealer will find your key code by using the VIN number of the vehicle. This will stop thieves from hot-wiring your vehicle.
If you're unable to locate your key, try using an app to locate it. The Toyota Key Finder App is available for many of the most recent models from the Toyota brand. It works with Bluetooth(r) which enables your key to emit a signal detectable by your tablet or smartphone. The signal is strong and can be detected by your phone, but it isn't enough to cause interference with other devices at the office or at home.
Alternately, you can take your key fob to an electronic retailer or automotive parts supplier and request that it be replaced. These stores are usually able to program a new key for your Toyota, and they'll likely have the part you need in stock. You may need to provide some form of identification as well, depending on your location and the store's policies.
When replacing the Toyota key fob, it is recommended to make use of OEM parts to ensure proper fit and performance. You should purchase the part directly from the manufacturer since it's designed specifically to fit your vehicle model and year and is able to meet strict safety standards.
Replace the battery
It may be time to replace your battery if you feel your car's has died or you notice that your key fob isn't responding as fast when you press the buttons. A new battery will remove the sluggishness and increase your vehicle's chance of starting in the cold or after an overnight stay in a parking lot. Follow these steps to replace your battery.
Close the hood, shut off the engine and set the parking brake. Find the battery, which is usually mounted on a tray in the front of the engine bay. There will be two terminals one black (negative) and one red (positive), where the cables are attached.
Use a wrench on the bolt that tightens up the negative cable connector at the terminal of the battery. Remove the cable and terminal. Be careful not to drop the battery, as it could rupture or leak. Place the battery in a safe location, making sure not to harm any electrical wiring or components in the engine bay.
It is also advisable to use an anti-corrosion spray for the battery terminals and the tray before installing your new battery. This will stop corrosion and will help make the new battery last longer.
Find the clamp or mounting plate that holds the battery once you are ready to install it. Make sure the positive terminal of the battery is in line with the positive terminal of the mount or clamp. Then lower the battery into the tray and then re-attach the mount or clamp.
Repeat the process for the negative terminal of the battery and cable connector. Use a wirebrush for cleaning the terminals, connectors and clamps on the tray. Spray the anti-corrosion solution onto the positive and negative terminals of your battery to prolong the life of your battery.
Replace the key fob
The key fob allows you to lock or unlock your car with a simple pressing of a button. If the battery fails or the fob is damaged in any way, it may be difficult to get it working properly. It's easy to replace the fob at home. Here's how:
The first step is remove the key from the fob. There should be a small slot or notch where the metal key fits into, and it's beneficial to have a small flat tool with you such as a screwdriver or coin to help open the case. You can utilize the detachable Toyota key to open older models, but newer models require you to insert the metal key through the slot.
Once you have the case open then locate the circuit board and note the location of where the battery sits in it (it's best to take the photo using your phone to help you identify). Then, remove the old one and replace it with a brand-new one. Refer to the owner's manual or our service center for help if you are unsure of the kind of battery that your Toyota fob requires.
Close the case carefully after installing the new battery and test your Toyota fob. If it's still not working then open the case and confirm that the battery's installation and that all connections are clean.
If everything is in order, you're ready to drive your Toyota with confidence again! If your key fob isn't working after replacement It's a good idea to contact our service department to have an inspection and repair. Our team is available to assist you with all your automotive needs! We are able to assist you with any automotive need whether it's a replacement key fob or a transponder chip. Give us a call today to set up an appointment! We look forward to serving you.
Replace the Transponder Chip
A lot of modern vehicles contain transponder chips which communicate with the vehicle's immobilizer system. This blocks unauthorized access to the vehicle and its engine. The transponder chip needs to be replaced when you lose your keyfob or if it ceases to function. This can be done by a locksmith or at the dealership. A professional locksmith will have the right tools for the job.
Find a blank Toyota Key and get it duplicated by the local locksmith. They'll have the right equipment and can do it much cheaper than the dealership. You'll also need a master key to program the new key. You can usually find these keys from a locksmith, dealer or even online.
The chip in Toyotas is secured by a split pin that can only be reached using the key that is half-extended. You can use a screwdriver or whatever you're using to slowly take the plastic from the inside of the key. YouTube has many videos that can assist you. After the transponder has been removed, wrap it in temporary. Then, put the inner key with the chip removed back into the housing and clamp it down tightly. Then seal the cuts using super glue if needed.
Insert the master key into the ignition cylinder, but don't turn it. Press and release the gas six times over 20 seconds. replacement keys for toyota will blink to show that the key has been registered.
Then, replace the battery in your replacement key fob and test it to ensure that it functions properly. If it doesn't, open the case and make sure that the battery is set correctly and that the connections are clean. If you're still struggling, contact a locksmith service that has a specialization in automotive keys for an easier solution. USA Lock & Key can provide you with fast and efficient Toyota key services.